POTENSI PENGGUNAAN PARTIKEL NANOSILIKA DARI ABU SEKAM PADI SEBAGAI BAHAN TAMBAHAN DALAM PEMBUATAN BETON (MINI REVIEW)

Authors

  • Aditya Wahyu Nugraha Program Studi Teknologi Industri Pertanian, Institut Teknologi Sumatera

DOI:

https://doi.org/10.21111/atj.v5i1.5111

Keywords:

Concrete, Nanoparticles, Rice husk, Silica,

Abstract

In the current era, the increase in infrastructure development correlate with the increased use of concrete. This is because currently, many buildings used concrete. However, concrete is prone to damage due to incomplete processes, for example cracking. Based on several studies that have been reviewed, these problems can be minimized by using silica, both micro, and nano sizes. In general, the silica used comes from quartz sand in the concrete mixture that has been studied. On the one hand, the use of silica is beneficial in the manufacture of concrete, but on the other hand it has a negative impact on the environment. If this is not done prevention, the environment will be more damaged. Therefore, this article looks at the potential of silica from rice husk ash and looks    at    the    characteristics    of    concrete    with     silica     addition     from     quartz     sand.

References

Adam F., Appaturi J. N., Iqbal., 2012. The utilization of rice husk silica as a catalyst: review and recent progress. Catalysis today. 190: 2 – 14.Aggarwal P., Singh R. P., Aggarwal Y., 2015. Use of nano silika in cement based materials – a review. Cogent Engineering. 2: 1-11.Andreas A. N., Kristianto H., Kurniawan D. F., 2016. Sintesis nanosilika dari sekam padi menggunakan metode sol gel dengan pelarut etanol. Prosiding seminar nasional teknik kimia “kejuangan”, pengembangan teknologi kimia untuk pengolahan sumber daya alam indonesia, pengembangan teknologi kimia untuk pengolahan sumber daya alam Indonesia, Yogyakarta.Atmaca N., Abbas M. L., Atmaca A., 2017. Effects of nano-silica on the gas permeability, durability and mechanical properties of high- strength lightweight concrete. Construction and Building Materials. 147: 17 – 26.Babu G. R., 2013. Effect of nano silica on properties of blended cement. International Journal of Computational Engineering Research. 3(5): 50 – 55.Biricik H., Sarier N., 2014. Comparative study of the characteristic nano silica, silicfume and fly ash- incorporated cemen mortars. Material Research. 17(3):570-582Bjornstrom J., Martinelli A., Matic, Bojesson L., Panas I., 2004. Accelerating effects of colloidal nano silica for benefical calcium- silicate-hydrate formation in cemen. Chemical physics letters. 392: 242 – 248.[BPS] Badan Pusat Statistik (ID). 2018. Tabel Dinamis [Internet]. [diunduh 2018 Juli 26]. Tersedia pada: https://www.bps.go.id/site/resultTabEsmaeili J., Andalibi K., 2013. Investigation of the effects of nano – silica on the properties of concrete in comparison with micro-silica. International Journal of Nano Dimension, 3(4):321-328.Givi A. N. N., Rashid S. A. A., Aziz F. N. A., Salleh M. A. M., 2010. Experiemental investigation of the size effects of SiO2 nano particleson the mechanical properties binary blended concrete. Composites part b engineering. 41: 673 – 677.Gopinath S., Mouli P. C. H., Murthy A. R., Iyer N. R., Maheswaran S,. 2012. Effect of nano silica on mechanical properties and durability of normal strength concrete. Archives of civil engineering. LVIII(4): 433-444.Handayani P. A., Nurjanah E., Rengga W.D. P., 2014. Pemanfaatan limbah sekam padi menjadi silika gel. Jurnal bahan alam terbarukan. 3(2): 19 – 24.Hayati D., Pardoyo., Azmiyawati C., 2017. Pengaruh variasi jenis asam terhadap karakter nanosilika yang disintesis dari abu sekam padi. Jurnal kimia sains dan aplikasi. 20(1): 1 – 4.Heidari A., Tavakoli D., 2013. A study of mechanical properties of ground ceramic powder concrete incorporating nano-SiO2 particles. Construction and building materials. 38: 255 – 264.Jalal M., Pouladkhan R. A., Norouzi H., Choubdar G., 2012. Chloride penetration, water absorption and electrical resistivity of high performance concrete containing nano silica and silica fume. Journal of American Science. 8: 278–284.Khan M. I, Siddique R., 2011. Utilization of silica fume in concrete: review of durability properties. Resources, conservation and reycling. 57: 30 –35.Khanzadi M., Tadayon M., Sepehri H., Sepehri M., 2010. Influence of Nano- Silica Particles on Mechanical Properties and Permeability of Concrete. Second international conference on sustainable construction materials and technologies. Italy.Le V. H., Thuc C. N. H., Thuc H. H., 2013. Synthesis of silica nanoparticles from vietnamese rice husk by sol – gel method. Nanoscale research letters. 8: 58.Li G., 2004. Properties of high-volume fly ash concrete incorporating nano- SiO2. Cement and concrete research. 34: 1043-1049.Li H., Xiao H., Yuan J., Qu J., 2004. Microstructure of cement mortar with nano particels. Composites. 35: 185 – 189.Liou H. T., Yang C. C., 2011. Synthesis and surface characteristics of nanosilicaproduced from alkali – extracted risk husk ash. Material sciece and engineering B. 176: 521– 529.Ltifi M., Guefrech A., Mounanga P., Khelidj A., 2011. Experimental study of the effect of addition of nano-silica on the behaviour of cement mortars Mounir. Procedia Engineering. 10: 900–905.Maheswaran S., Bhuvaneshweri B., Palani G. S., Nagesh R. I., Kalaiselvam S., 2013. An overview on the influence of nano silica in concrete and a research initiative. Research journal of recent sciences. 2: 17-24.Parida S., 2015. Effect of Nano silica on the compressive strength of concrete [thesis]. National instate of technology. Rourkela. Quercia G., Brouwers H. J. H., 2010. Application of nano silica (nS) in concrete mixtures. 8th fib Ph. Symposium in Kgs. Lyngby. Denmark.Sanchez F., Sobolev K., 2010. Nanotechnology in concrete – a review. Constr Build Mater. 24(11):2060–71.Selvakumar KV, Umesh A, Ezhilkumar P, Gayatri S, Vinith P, and Vignesh V. Extraction of Silica from Burnt Paddy Husk. International Journal of ChemTech Research. 6 (9): 4455 – 4459.Senff L., Labrincha J. A., Ferreira V. M., Hotza D., Repette W. L., 2009. Effect of nano-silica on rheology and fresh properties of cement pastes and mortars. Construction and Building Materials. 23: 2487–2491.Sofyan I. G. G., Alauhdin M., Susatyo E. B., 2013. Sintesis dan Karakterisasi Bahan Keramik Cordierite dari Abu Sekam Padi. Indonesian Journal of Chemical Science, 2: (2).Suka I. G., Simanjunta W., Sembiring S., dan Trisnawati E., 2008. Karakteristik Silika Sekam Padi dari Provinsi Lampung yang Diperoleh dengan Metode Ekstraksi. MIPA, 37(1): 47 – 52.Vinayag M. B., Aleem M. I. A., Thaarrini J., Roja S. Y., 2015. Review on Strength and durability characteristic of geopolimer concrete with macro silica, nano silica. International research journal of engineering and technology (IRJET). 2(9): 1-4.Yogendran V., Langan B. W., 1987. Utilization of silica fume in high strength concrete. In: Proceedings of utilization of high strength concrete, Stavanger.Tapir Publisher Trondheim, Norway.Yoshida S. 1981. Fundamentals of Rice Crop Science. Los Baños, Philippines: IRRI.Zhang M. H., Li H., 2011. Pore structur e and chloride permeability of concrete containing nano-particles for pavement. Construction and Building Materials. 25: 608 – 616Zhang M. H., Islam J., 2012. Use of nano- silica to reduce setting time and increase early strength of concretes with high volumes of fly ash or slag. Construction and Building Materials. 29: 573–580.Zhang M. H., Islam J., Peethamparan S., 2012. Use of nano-silica to increase early strength and reduce setting time of concretes with high volumes of slag. Cement and Concrete Composites. 34: 650–662.

Downloads

Published

2021-05-26

Issue

Vol. 5 No. 1 (2021): Agroindustrial Technology Journal

Section

Articles

License

The author whose published manuscript approved the following provisions:

1. The right of publication of all material published in the journal / published in the Agroindustrial Technology Journal is held by the editorial board with the knowledge of the author (moral rights remain the author of the script).

2. The formal legal provisions for access to digital articles of this electronic journal are subject to the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), which means that Agroindustrial Technology Journal reserves the right to save, transmit media or format, Database), maintain, and publish articles without requesting permission from the Author as long as it keeps the Author's name as the owner of Copyright.
3. Printed and electronically published manuscripts are open access for educational, research and library purposes. In addition to these objectives, the editorial board shall not be liable for violations of copyright law.