Optimizing Ergonomic Evaluation of Heavy Workload in Coffee Roasting to Reduce Operator Injury Risks: A Case Study using Cardiovascular Load, Rula, And Reba Methods
Optimizing Ergonomic Evaluation of Heavy Workload in Coffee Roasting to Reduce Operator Injury Risks: A Case Study using Cardiovascular Load, Rula, And Reba Methods
DOI:
https://doi.org/10.21111/atj.v9i1.14360Keywords:
Ergonomics, RULA, REBA, Cardiovascular Load, Work Posture, Coffee RoastingAbstract
Coffee production in Indonesia continues to grow along with the increasing demand for specialty coffee. One of the crucial stages in coffee processing is the roasting process, which requires close attention to the physical load and work posture of workers. This study evaluates the ergonomic risks associated with the coffee roasting process at Kedai Koffie Tandjoeng, a small-scale coffee business in Sumedang, Indonesia. Despite operating since 2015, the roasting process had never undergone a structured ergonomic assessment, even though the operator reported frequent discomfort, especially in the upper limbs and lower back. To assess these risks, this study used a combination of Cardiovascular Load (CVL), Rapid Upper Limb Assessment (RULA), and Rapid Entire Body Assessment (REBA) methods. The CVL result of 39.14% indicated a light to moderate physical workload, suggesting the need for workload management to prevent long-term fatigue. The RULA score of 5 and REBA score of 4 revealed moderate ergonomic risks, particularly in the upper arms and wrists during the lifting and pouring stages. Based on these findings, four recommendations were proposed: ergonomic training, the use of assistive tools (e.g., step stools), structured rest periods, and workstation layout adjustments. This study contributes to ergonomic research in the context of micro and small enterprises by applying an integrated assessment approach to a previously unassessed but physically demanding process. The results provide a practical foundation for future ergonomic interventions to reduce injury risks in small-scale coffee production environments. Keywords: Ergonomics, Physical Load, Work Posture, Cardiovascular Load, RULA, REBA, Coffee RoastingReferences
Abobakr, A., Nahavandi, D., Hossny, M., Iskander, J., Attia, M., Nahavandi, S., & Smets, M. (2019). RGB-D ergonomic assessment system of adopted working postures. Applied ergonomics, 80, 75-88.
Akbilek, N. (2017). A flow-focused facility layout application in food machine industry. Sakarya University Journal of Science, 21(5), 951-960. https://doi.org/10.16984/saufenbilder.283221
Bactiar, A. R. (2020). Desain Dan Pengujian Kerja Roasting Kopi Level Medium Roast Pada Alat Mesin Roaster Di Puslitkoka Indonesia Kabupaten Jember.
Budiman, E., & Setyaningrum, R. (2012). Perbandingan metode-metode biomekanika untuk menganalisis postur pada aktivitas manual material handling (mmh) kajian pustaka. J@ ti Undip: Jurnal Teknik Industri, 1(3), 46-52.
Cardenas, D. C. (2023). Health and Safety at Work: Importance of the Ergonomic Workplace. SCT Proceedings in Interdisciplinary Insights and Innovations, 1, 83-83.
Deouskar, N. (2017). The impact of ergonomics on the productivity of people. International Journal of Marketing & Financial Management, 5(6), 59-63.
Dhiya, P. Y., & Rahmah, D. M. (2019). Mental Workload And Ergonomic Analysis On Production Department At Pt. XYZ. Journal of Industrial and Information Technology in Agriculture (JIITA).
Diniaty, D., & Muliyadi, Z. (2016). Analisis Beban Kerja Fisik Dan Mental Karyawan Pada Lantai Produksi Dipt Pesona Laut Kuning. Sains, Teknologi Dan Industri, 13(2), 203–210.
Ervil, R., & Fadli, A. (2022). Pengukuran Beban Kerja Fisik Dan Mental Menggunakan Metode Cvl (Cardiovascular Load) Dan Nasa-Tlx (National Aeronautics and Space Administration-Task Load Index). J. Sains dan Teknol. J. Keilmuan dan Apl. Teknol. Ind, 22(1), 177.
Hancock, P. A., & Meshkati, N. (Eds.). (1988). Human mental workload (Vol. 52). Amsterdam: North-Holland.
Hidjrawan, Y., & Sobari, A. (2019). Analisis Postur Kerja Pada Stasiun Sterilizer Dengan Menggunakan Metode Owas Dan Reba. Jurnal optimalisasi, 4(1), 1-10.
Hignett S, McAtamney L. Rapid entire body assessment (REBA). Appl Ergon. 2000 Apr;31(2):201-5. doi: 10.1016/s0003-6870(99)00039-3. PMID: 10711982.
Joanda, A. D., & Suhardi, B. (2017). Analisis Postur Kerja dengan Metode REBA untuk Mengurangi Resiko Cedera pada Operator Mesin Binding di PT. Solo Murni Boyolali. In Seminar dan Konferensi Nasional IDEC (Vol. 2017).
Krisnaningsih, E., Dwiyatno, S., Arlani, T., Jubaedi, A. D., & Cahyadi, D. (2023). Beban Kerja Psikologis dan Fisik dengan NASA-TLX dan Cardiovascular Load (CVL). Jurnal Intent: Jurnal Industri dan Teknologi Terpadu, 6(1), 1-13.
Lahay, Idham Halid, Hasanuudin, dan Hendra Uloli. 2017. “Penilaian Postur Kerja Pada Pekerja Pembuat Batako Di Gorontaloâ€. Gorontalo.
Maulid, M. R., Aisyah, H., & Rahmah, D. M. Identifikasi Pengaturan Sistem Kerja Pada Pengolahan Kopi Proses Natural dengan Analisis Penanganan Bahan, Peta Kerja, Beban Fisiologis, dan Luas Lantai (Studi Kasus : Ikm M45t3r Ammo Coffee). JURNAL INDUSTRI PERTANIAN.
McAtamney, L., & Corlett, E. N. (1993). RULA: a survey method for the investigation of work-related upper limb disorders. Applied ergonomics, 24(2), 91-99.
Mishra & Narendra (2020). OCCUPATIONAL ERGONOMICS AND JOB SATISFACTION IN HOSPITALITY OPERATION: A CASE OF RESORT HOUSEKEEPERS IN NORTHERN CEBU, PHILIPPINES. IJARIIE INTERNATIONAL JOURNAL.
Mulder, L. J. (1992). Measurement and analysis methods of heart rate and respiration for use in applied environments. Biological psychology, 34(2-3), 205-236.
Oktavia & Ratih, R. S. (2021). Pengukuran Beban Kerja Fisik Dan Tingkat Kelelahan Karyawan Pt. Xyz Menggunakan Metode Cvl Dan Ifrc.
Pratiwi, P. A., Widyaningrum, D., & Jufriyanto, M. (2021). Analisis Postur Kerja Menggunakan Metode REBA Untuk Mengurangi Risiko Musculoskeletal Disorder (MSDs). PROFISIENSI: Jurnal Program Studi Teknik Industri, 9(2), 205-214.
Simanjuntak, R. A., & Susetyo, J. (2022). Penerapan ergonomi di lingkungan kerja pada UMKM. Dharma Bakti, 37-46.
Singh, J. (2013). A Literature Review On MSDs Using Ergonomic Body Assessment Tools: RULA And REBA. IJSR - INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH, 8.
Tarwaka, Bakri dan Solichul. 2004. Ergonomi Untuk Keselamatan, Kesehatan Kerja dan Produktivitas. Jakarta. UNIBA Press.
Tee, K. S., Low, E., Saim, H., Zakaria, W. N. W., Khialdin, S. B. M., Isa, H., ... & Soon, C. F. (2017, September). A study on the ergonomic assessment in the workplace. In AIP conference proceedings (Vol. 1883, No. 1). AIP Publishing.
Tiogana, V., & Hartono, N. (2020). Analisis postur kerja dengan menggunakan REBA dan RULA di PT X. Journal of Integrated System, 3(1), 9-25.
Yasmin, A., & Rizalmi, S. R. (2023). Analisis Beban Kerja Menggunakan Cardiovascular Load, Konsumsi Oksigen dan Heart Rate Variability Pada Karyawan Bongkar Muat. MINE-TECH: Journal of Manufacturing in Industrial Engineering & Technology, 2(1), 1-8.
Downloads
Submitted
Accepted
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The author whose published manuscript approved the following provisions:
1. The right of publication of all material published in the journal / published in the Agroindustrial Technology Journal is held by the editorial board with the knowledge of the author (moral rights remain the author of the script).
2. The formal legal provisions for access to digital articles of this electronic journal are subject to the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), which means that Agroindustrial Technology Journal reserves the right to save, transmit media or format, Database), maintain, and publish articles without requesting permission from the Author as long as it keeps the Author's name as the owner of Copyright.
3. Printed and electronically published manuscripts are open access for educational, research and library purposes. In addition to these objectives, the editorial board shall not be liable for violations of copyright law.
